Jinan Smatech Machinery Enterprise Co., Ltd. smatech@coomachinery.com ↗
SMTJinan Smatech Machinery
Enterprise Co., Ltd.
LJJA-CNC-500 Heavy-duty CNC Corner Connector SawEquipment image for reference. Branding and final configuration are confirmed with your quotation.
Aluminium / Corner connector cutting

LJJA-CNC-500

Heavy-duty CNC Corner Connector Saw

Automatically feeds and cuts aluminium corner-connector profile stock into short connector pieces.

Automatic feed length5–1000 mm
Cutting width × height350 × 140 mm
Blade diameter500 mm
Request a Quote ↗

01 / FUNCTION & PROCESS

What does this machine do?

Automatically feeds and cuts aluminium corner-connector profile stock into short connector pieces. These pieces are prepared for the downstream frame-joining process.

What to review before selecting

  1. Provide connector cross-section and finished slice dimensions.
  2. Check feed settings with kerf and tail-stock allowances.
  3. Trial-cut pieces and check their fit in the intended joint.
02 / SELECTION ADVANTAGES

Why consider LJJA-CNC-500?

Its 5–1000 mm automatic feed range and 350 × 140 mm section envelope distinguish it from the smaller connector saws. Feed length is not the total raw stock length.

Jinan Smatech Machinery Enterprise Co., Ltd. can review your requirement against this catalogue configuration when preparing a quotation.

Check this model for my part →
03 / APPLICATIONS

Typical applications

  • Aluminium corner-connector preparation
  • Repeated connector pieces for frame assembly
  • Dedicated short-piece production from connector stock

Application examples are starting points for selection. Actual compatibility depends on the profile, tooling and required result.

04 / MODEL & UTILITIES

Essential information before ordering

Electrical power in kW is not the supply voltage. Confirm voltage, frequency and phase for the destination workshop.

Model
LJJA-CNC-500
Material
Aluminium
Voltage / frequency
To be confirmed for this model and destination.
Electrical phase
To be confirmed in the electrical configuration.
Compressed-air requirement
Confirm whether an air connection is required and obtain its pressure and flow requirements.
KNOW THE MACHINE

Technical specifications

Catalogue reference: physical page 11. Check your profile drawing and power supply before ordering.

LJJA-CNC-500 specifications
Automatic feed length5–1000 mm
Cutting width × height350 × 140 mm
Blade diameter500 mm
Power4.0 kW
Cutting angle90 degrees
How to read these specifications

Automatic feed length describes the feed increment, not the length of raw material the machine can hold.

Account for saw kerf and unusable tail stock when estimating how many connector pieces can be cut from a bar.

Standard & optional configuration

The catalogue does not provide a separate confirmed standard/optional supply list. Tooling, electrical compatibility, software where applicable, installation and service scope are confirmed with the quotation.

Request a written supply list for your model, including tooling and any project-specific accessories.

CHECK THE FIT

Start with your profile.

Connector section; finished slice length; blade kerf; feed tolerance and material-tail allowance.

Include a representative part drawing, required finish, target output and workshop power supply. This allows the quotation to address the actual machine configuration.

Discuss this model ↗