Jinan Smatech Machinery Enterprise Co., Ltd. smatech@coomachinery.com ↗
SMTJinan Smatech Machinery
Enterprise Co., Ltd.
LJZD-CNC-400 CNC Glazing Bead Cutting SawEquipment image for reference. Branding and final configuration are confirmed with your quotation.
Aluminium / Profile cutting

LJZD-CNC-400

CNC Glazing Bead Cutting Saw

Cuts glazing beads used around glazing openings in aluminium windows and doors.

Cutting length200–2500 mm
Catalogue width / height70 / 80 mm
Blade diameter400 mm
Request a Quote ↗

01 / FUNCTION & PROCESS

What does this machine do?

Cuts glazing beads used around glazing openings in aluminium windows and doors. Bead shape and fit are the selection focus, rather than the larger frame profiles handled by general double-head saws.

What to review before selecting

  1. Define finished length, end angles and the section orientation.
  2. Check blade clearance, support and clamping at that angle.
  3. Measure trial cuts before committing the production batch.
02 / SELECTION ADVANTAGES

Why consider LJZD-CNC-400?

The dedicated bead application and 200–2500 mm length range provide a basis for repetitive bead preparation. Demonstrate the measurement device and actual end-cut method with your bead sample.

Jinan Smatech Machinery Enterprise Co., Ltd. can review your requirement against this catalogue configuration when preparing a quotation.

Check this model for my part →
03 / APPLICATIONS

Typical applications

  • Glazing bead preparation for aluminium windows
  • Glazing bead preparation for aluminium doors
  • Bead matching to measured glazing openings

Application examples are starting points for selection. Actual compatibility depends on the profile, tooling and required result.

04 / MODEL & UTILITIES

Essential information before ordering

Electrical power in kW is not the supply voltage. Confirm voltage, frequency and phase for the destination workshop.

Model
LJZD-CNC-400
Material
Aluminium
Voltage / frequency
To be confirmed for this model and destination.
Electrical phase
To be confirmed in the electrical configuration.
Compressed-air requirement
Confirm whether an air connection is required and obtain its pressure and flow requirements.
KNOW THE MACHINE

Technical specifications

Catalogue reference: physical page 10. Check your profile drawing and power supply before ordering.

Confirm the glazing-bead cutting method and measuring device with a sample.

LJZD-CNC-400 specifications
Cutting length200–2500 mm
Catalogue width / height70 / 80 mm
Blade diameter400 mm
Power1.5 kW
Blade speed2800 rpm
Catalogue cutting angle90 degrees
How to read these specifications

Section capacity changes with the cutting angle and profile orientation. Ask for the working envelope at your required angle.

Finished length, stock support and stop travel are not interchangeable. Confirm the sizing method for your shortest and longest parts.

Standard & optional configuration

The catalogue does not provide a separate confirmed standard/optional supply list. Tooling, electrical compatibility, software where applicable, installation and service scope are confirmed with the quotation.

Request a written supply list for your model, including tooling and any project-specific accessories.

CHECK THE FIT

Start with your profile.

Length range; section at the required angle; clamping; angle reference; blade and kerf allowance.

Include a representative part drawing, required finish, target output and workshop power supply. This allows the quotation to address the actual machine configuration.

Discuss this model ↗