Aluminium
LJVA-CNC-6500
CNC Aluminium Cutting Center
- Cutting length
- 300–6500 mm
- Profile width × height
- 120 × 150 mm
- Cutting angles
- 45 / 90 degrees
Equipment image for reference. Branding and final configuration are confirmed with your quotation.Aluminium / Integrated cutting and machiningRequest a Quote ↗
LFH-CNC-6500
Laser-assisted Cutting & Milling Center
Combines aluminium profile sawing, drilling/milling and laser operations in a composite machining center.
Cut part length200–6000 mm
Raw profile length1000–6500 mm
Laser power1.5 kW
01 / FUNCTION & PROCESS
What does this machine do?
Combines aluminium profile sawing, drilling/milling and laser operations in a composite machining center. It is intended for parts that need both a cut-to-length blank and further features, rather than for sheet-metal fabrication.
What to review before selecting
- Review the stock section, raw length and complete part list.
- Agree the cutting or machining sequence and workholding method.
- Validate finished dimensions and a representative production cycle.
02 / SELECTION ADVANTAGES
Why consider LFH-CNC-6500?
Combining operations offers a way to reduce transfers between separate machines. The actual laser process, fixtures and cycle sequence must be checked against your part drawing.
Jinan Smatech Machinery Enterprise Co., Ltd. can review your requirement against this catalogue configuration when preparing a quotation.
Check this model for my part →03 / APPLICATIONS
Typical applications
- Window and door profile cutting lists
- Parts requiring cutting followed by hole or slot preparation
- Production planning with repeated profile batches
Application examples are starting points for selection. Actual compatibility depends on the profile, tooling and required result.
04 / MODEL & UTILITIES
Essential information before ordering
Electrical power in kW is not the supply voltage. Confirm voltage, frequency and phase for the destination workshop.
- Model
- LFH-CNC-6500
- Material
- Aluminium
- Voltage / frequency
- To be confirmed for this model and destination.
- Electrical phase
- To be confirmed in the electrical configuration.
- Compressed-air requirement
- Confirm whether an air connection is required and obtain its pressure and flow requirements.
KNOW THE MACHINE
Technical specifications
Catalogue reference: physical page 3. Check your profile drawing and power supply before ordering.
| Cut part length | 200–6000 mm |
|---|---|
| Raw profile length | 1000–6500 mm |
| Laser power | 1.5 kW |
| Marking laser | 50 W |
| Drilling/milling spindles | 4 × 3.7 kW |
| Saw motor | 3.0 kW |
| Overall dimensions (L × W × H) | 15250 × 3500 × 2650 mm |
| Approx. weight | 7200 kg |
How to read these specifications
Raw stock length and finished-part length describe different stages. Both must accommodate the proposed cutting list.
Motor power describes the drive rating, not verified hourly output. Assess a representative complete cycle.
Standard & optional configuration
The catalogue does not provide a separate confirmed standard/optional supply list. Tooling, electrical compatibility, software where applicable, installation and service scope are confirmed with the quotation.
Request a written supply list for your model, including tooling and any project-specific accessories.
CHECK THE FIT
Discuss this model ↗Start with your profile.
Profile length and cross-section; shortest finished part; required operations; batch sizes; software data format.
Include a representative part drawing, required finish, target output and workshop power supply. This allows the quotation to address the actual machine configuration.
Related machines