Aluminium
LFH-CNC-6500
Laser-assisted Cutting & Milling Center
- Cut part length
- 200–6000 mm
- Raw profile length
- 1000–6500 mm
- Laser power
- 1.5 kW
Equipment image for reference. Branding and final configuration are confirmed with your quotation.Aluminium / Integrated cutting and machiningRequest a Quote ↗
LJVA-CNC-6500
CNC Aluminium Cutting Center
Cuts aluminium profile stock into programmed lengths for window and door components.
Cutting length300–6500 mm
Profile width × height120 × 150 mm
Cutting angles45 / 90 degrees
01 / FUNCTION & PROCESS
What does this machine do?
Cuts aluminium profile stock into programmed lengths for window and door components. The catalogue lists 45- and 90-degree cutting, so it can be considered for both mitred and square-ended parts within the stated envelope.
What to review before selecting
- Review the stock section, raw length and complete part list.
- Agree the cutting or machining sequence and workholding method.
- Validate finished dimensions and a representative production cycle.
02 / SELECTION ADVANTAGES
Why consider LJVA-CNC-6500?
A CNC cutting center suits production lists with repeated lengths. Assess it using a full cutting list, including material tails and changeovers, instead of a headline output figure.
Jinan Smatech Machinery Enterprise Co., Ltd. can review your requirement against this catalogue configuration when preparing a quotation.
Check this model for my part →03 / APPLICATIONS
Typical applications
- Window and door profile cutting lists
- Parts requiring cutting followed by hole or slot preparation
- Production planning with repeated profile batches
Application examples are starting points for selection. Actual compatibility depends on the profile, tooling and required result.
04 / MODEL & UTILITIES
Essential information before ordering
Electrical power in kW is not the supply voltage. Confirm voltage, frequency and phase for the destination workshop.
- Model
- LJVA-CNC-6500
- Material
- Aluminium
- Voltage / frequency
- To be confirmed for this model and destination.
- Electrical phase
- To be confirmed in the electrical configuration.
- Compressed-air requirement
- Confirm whether an air connection is required and obtain its pressure and flow requirements.
KNOW THE MACHINE
Technical specifications
Catalogue reference: physical page 4. Check your profile drawing and power supply before ordering.
| Cutting length | 300–6500 mm |
|---|---|
| Profile width × height | 120 × 150 mm |
| Cutting angles | 45 / 90 degrees |
| Total power | 19 kW |
| Blade diameter | 550 mm |
| Blade speed | 3200 rpm |
| Overall dimensions (L × W × H) | 14000 × 3000 × 2000 mm |
How to read these specifications
Raw stock length and finished-part length describe different stages. Both must accommodate the proposed cutting list.
Motor power describes the drive rating, not verified hourly output. Assess a representative complete cycle.
Standard & optional configuration
The catalogue does not provide a separate confirmed standard/optional supply list. Tooling, electrical compatibility, software where applicable, installation and service scope are confirmed with the quotation.
Request a written supply list for your model, including tooling and any project-specific accessories.
CHECK THE FIT
Discuss this model ↗Start with your profile.
Profile length and cross-section; shortest finished part; required operations; batch sizes; software data format.
Include a representative part drawing, required finish, target output and workshop power supply. This allows the quotation to address the actual machine configuration.
Related machines